Optimization of Wire Electrical Discharge Machining Process Parameters on kerf width in Machining of Titanium Alloy using Response Surface Methodology

Research Area: Volume 5,Issue 1, Jan. 2016 Year: 2016
Type of Publication: Article Keywords: Wire EDM, ANOVA, Kerf Width, SEM
Authors:
  • Siva Prasad Arikatla
  • Dr K. Tamil Mannan
  • Dr Arkanti Krishnaiah
Journal: IJEIR Volume: 5
Number: 1 Pages: 122-127
Month: January
ISSN: 2277-5668
Abstract:
Wire Electric Discharge Machining (WEDM) is extensively used for machining of complex shapes in the field of die and mould making, medical, aerospace and automobile industries. Improper selection of WEDM process parameters setting can affect the machining efficiency and surface roughness due to arcing phenomenon that lead by discharge point of focus. Present study has been made to optimize the process parameters such as pulse on time, pulse off time, pulse current, servo voltage and wire tension during machining of Ti-6Al-4V titanium alloy by WEDM process using Response Surface Methodology. The analysis of variance (ANOVA) was carried out to study the effect of process parameters on process performance i.e. kerf width. The mathematical models are also developed for kerf width and validated with the experimental results. Further, the machined surface of kerf was examined by using scanning electron microscope (SEM). The experimental results reveals that, as the pulse on time/ pulse duration, input power, server voltage and wire tension increases, and the kerf width also increases. This paper highlights the importance of process parameters on surface roughness and surface topography of wire electric discharge machined kerf surface.

Indexed By:

Our Journals

IJECCE
International Journal of Electronics Communication and Computer Engineering
ISSN(Online): 2249 - 071X
ISSN (Print) : 2278 – 4209
www.ijecce.org
Submissions open
IJAIR
International Journal of Agriculture Innovations and Research
ISSN(Online) : 2319 – 1473
www.ijair.org
Submissions open
IJISM
International Journal of Innovation in Science and Mathematics
ISSN : 2347 – 9051
www.ijism.org
Submissions open
IJEIR
International Journal of Engineering Innovations and Research
ISSN(Online) : 2277 – 5668
www.ijeir.org
Submissions are open.

IJAIM
International Journal of Artificial Intelligence and Mechatronics
ISSN(Online) : 2320 – 5121
www.ijaim.org
Submissions open
IJRAS
International Journal of Research in Agricultural Sciences
ISSN(Online) : 2348 – 3997
www.ijras.org
Submissions open

Submission Open

"Submissions Open For Volume 8,Issue 6,Nov.- Dec., 2019"

Click here to submit article.........

Latest Updates

Submissions open

Submissions open

For

"Volume 8,Issue 6,Nov.- Dec., 2019"


 
Published Papers

Accepted Papers are published in

1. Recently Published Issue.

"Vol. 8, Issue 5,Sept. - Oct., 2019"


 

Dear Authors

Once author receives paper id, please always mention it in subject of your mail.

"Submissions Open For Volume 8,Issue 6,Nov.- Dec., 2019"

Message for Authors